Junfac universal shafts?
2 posters
Page 1 of 1
Junfac universal shafts?
Hey gang,
I upgraded the motor in my Dingo to a Tamiya RZ, and consequently my uni/prop shafts lasted a few minutes before licorice sticking and busting off at the pins.
I have weighted wheels too, which weren't a problem with the old stock motor, but I think the extra torque from the RZ was too much with this combination.
I'm looking at getting Junfac shafts, and the J90025 kit is what they recommend for the Dingo. However this kit comes with 82-117mm and 95-130mm shafts.
The problem is that my Dingos shafts are the same length front and back, and around 115mm compressed, so I suspect I need 95-130mm shafts front and back?
Junfac have a J90026 kit which contains 2X 95-130mm shafts, and I am suspecting that this would be more suitable for the SWB Dingo RTR. Can anyone confirm?
Thanks, Gav.
I upgraded the motor in my Dingo to a Tamiya RZ, and consequently my uni/prop shafts lasted a few minutes before licorice sticking and busting off at the pins.
I have weighted wheels too, which weren't a problem with the old stock motor, but I think the extra torque from the RZ was too much with this combination.
I'm looking at getting Junfac shafts, and the J90025 kit is what they recommend for the Dingo. However this kit comes with 82-117mm and 95-130mm shafts.
The problem is that my Dingos shafts are the same length front and back, and around 115mm compressed, so I suspect I need 95-130mm shafts front and back?
Junfac have a J90026 kit which contains 2X 95-130mm shafts, and I am suspecting that this would be more suitable for the SWB Dingo RTR. Can anyone confirm?
Thanks, Gav.
chicaboo- Posts : 19
Legend Status : 0
Join date : 2012-06-24
Age : 47
Location : Logan
Re: Junfac universal shafts?
Hey gav when I got mine there were two scx10 kits listed one for the honcho and a dingo kit look up junfac directly it was much eaiser and verry quick .
BIGBOY- Posts : 149
Legend Status : 3
Join date : 2012-05-18
Age : 53
Location : Park ridge /Brisbane
Re: Junfac universal shafts?
Yep, Junfac list the short/medium shaft combo for the SCX10 [not Honcho].
http://www.junfac.com/shop/index.php?main_page=product_info&cPath=27&products_id=276
I'm just worried that the rear 82-117mm shaft in this kit isn't long enough, as my stock units are the same length.
http://www.junfac.com/shop/index.php?main_page=product_info&cPath=27&products_id=276
I'm just worried that the rear 82-117mm shaft in this kit isn't long enough, as my stock units are the same length.
chicaboo- Posts : 19
Legend Status : 0
Join date : 2012-06-24
Age : 47
Location : Logan
Similar topics
» Junfac shocks
» Outdrive shafts
» Metal Drive Shafts
» drive shafts for losi mrc or similar 4mm output
» Outdrive shafts
» Metal Drive Shafts
» drive shafts for losi mrc or similar 4mm output
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|